Are you a free subscriber and you use a remote control to control your box . But then, one day, you will notice that your the remote control flashes red quickly and no longer works properly. What is the cause of this problem and how to fix it? This is what we will see in this article.
Possible causes of the Free remote control flashing red
There are several reasons Your free remote is flashing red quickly . Here are the most common ones:
- The remote control is discharging
- The remote control is faulty
- The remote control is out of sync
Solutions to fix red flashing on Free Remote
If your Free remote is flashing red rapidly, here are solutions you can try to fix the problem:
Change the batteries
The first thing you should do is check the battery status of your remote control. If they are worn, replace them with new batteries of the same type ( LR03 or AAA ). If the problem persists, continue to the next solution.
Reset the remote control
If changing the batteries isn’t enough, you can try resetting your remote. To do this, you need to press at the same time Free and Stand by for 10 seconds, until the red LED turns off. Then release the buttons and briefly press the Free . The red LED should blink once and then turn off. If the problem persists, continue to the next solution.
Resync the remote
If resetting the remote isn’t enough either, you can try re-syncing your remote with your box. To do this, you need to follow the steps below:
- Turn off your box by pressing it On/Off in the back.
- Bring your remote closer to your box (less than a meter).
- Press it Free and Sleep for 10 seconds, until the red LED turns off.
- Release the buttons and momentarily press it Free . The red LED should blink once and then turn off.
- Activate your box by pressing it On/Off located at the back.
- Wait for the time to appear in the box, then tap it momentarily Free . The red LED should blink once and then turn off.
- Your remote has re-synced with your box and should be working normally.
Here are some frequently asked questions from Free remote users:
How do I know if my Free remote is out of charge?
You can find out by pressing any button on your remote control. If the red LED blinks weakly or not at all, your batteries are dead. If the red LED blinks normally, your batteries are still good.
How do I know if my Free remote is faulty?
You can find out by testing your remote control with another compatible device, such as a TV or DVD player. If your remote does not work with this device, it is defective. If it works, it’s not defective.
How do I know if my free remote is out of sync?
You can find out by pressing the Free button on your remote. If the red LED is flashing quickly, your remote is out of sync. If the red LED blinks normally, your remote is syncing.
How do I change my Free remote control password?
You can change your Free remote control code if you want to control multiple boxes with the same remote control or if you want to avoid interference with other remote controls. To do this, you need to follow the steps below:
- Turn off your box by pressing it On/Off in the back.
- Press it Free and Sleep for 10 seconds, until the red LED turns off.
- Release the buttons and momentarily press it Free . The red LED should blink once and then turn off.
- Press the number button corresponding to the code you want to assign to your remote control (1 to 9). The red diode should flash as many times as the selected number and then turn off.
- Activate your box by pressing it On/Off located at the back.
- Wait for the time to appear in the box, then tap it momentarily Free . The red LED should blink once and then turn off.
- Your remote control has been code changed and must work with the corresponding box.
How can I repair my free remote control if it is broken?
If your Free remote is broken, for example if it no longer lights up or if a button no longer works, you can try to repair it yourself by following the tips in this tutorial: /watch?v=Zw7Q6x2Zm0k. Otherwise, you can contact Free Customer Service to request a replacement or repair of your remote control.
How can I clean my free remote control if it is dirty?
If your Free remote control is dirty, for example if it has fingerprints or dust, you can clean it by following these steps:
- Remove the batteries from your remote control and set them aside.
- Use a soft, slightly damp cloth to wipe the surface of your remote control. Do not use chemicals or abrasives that could damage your remote control.
- Use a cotton swab or toothpick to clean the gaps between the buttons and around the red LED. Do not apply too much pressure to avoid damaging the electrical contacts.
- Allow your remote to dry for a few minutes.
- Replace the batteries in your remote control and check that it is working properly.
How do I use the Free Remote with other devices?
You can use your Free remote control with other compatible devices, such as a TV, DVD player or amplifier. You can even use it to access the secret menu of your Samsung TV.
To do this, you need to program your remote by following the steps below:
- Turn on the device you want to control with your remote control.
- Press it TV on your remote control for 3 seconds, until the red LED lights up.
- Press the number button corresponding to the type of device you want to control (1 for a TV, 2 for a DVD player, 3 for an amplifier).
- Power button on your remote control until the device turns off.
- Release it Power and short press it TV . The red LED should blink once and then turn off.
- Your remote control is programmed to control the device you have selected. You can test other functions of your remote control by pressing the corresponding buttons.
How do I unprogram my Free remote if I no longer want to control other devices?
You can unprogram your Free remote if you no longer want to control other devices with it. To do this, you need to follow the steps below:
- Press it TV on your remote control for 3 seconds, until the red LED lights up.
- Press the number button corresponding to the type of device you want to unprogram (1 for TV, 2 for DVD player, 3 for amplifier).
- Free button on your remote control for 10 seconds until the red LED turns off.
- Free button and press it momentarily TV . The red LED should blink once and then turn off.
- Your remote control has been deprogrammed and no longer controls the selected device. You can only control your box with your remote control.
conclusion
Now you know why your Free remote is flashing red fast and how to fix this problem . We hope this article was helpful to you and that you were able to regain control of your box. If you want to change your mobile phone and benefit from a state-of-the-art smartphone at an attractive price, discover the Free Flex service, free rental with option to buy. If you have any further questions or experience other difficulties with the free remote control, please do not hesitate to do so contact Free Customer Service on 3244 or visit their website